Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   Check Your Hood Scoop (http://www.clubcobra.com/forums/backdraft-racing/79555-check-your-hood-scoop.html)

h2oman 06-07-2007 10:59 AM
Check Your Hood Scoop
 
Hey Guys,
I had been hearing a slight rattle for a while when my car was at idle. Couldn't figure it out until I tugged on the hood scoop today. The front was able to wiggle up and down just a hair. I used a 2.5mm hex key on top and 7mm socket underneath, tightened at least a full turn on every screw. Fired it back up, no more rattle. :MECOOL:
http://www.clubcobra.com/photopost/d...Hood_Scoop.jpg


I only snugged them down. Didn't want to take a chance on cracking the gel coat. :eek:

Also posted on www.backdraftboys.com

jdog 06-07-2007 11:38 AM
Mine too!
 
I found the same thing with mine, a few months ago.

jdog

priobe 06-07-2007 12:08 PM
Did your removable hood scoop come with you setup or did you have it done on your own?

jdog 06-07-2007 12:22 PM
Installed!
 
Mine came already installed by Shelby.

jdog

Calbullet 06-07-2007 12:57 PM
Jdog,

not to change the subject, but did your wheel problem get fixed??


Mel

h2oman 06-07-2007 02:34 PM
Quote:
Originally Posted by priobe
Did your removable hood scoop come with you setup or did you have it done on your own?
Mine came installed from Backdraft

jdog 06-07-2007 02:48 PM
So far!
 
Quote:
Originally Posted by Calbullet
Jdog,

not to change the subject, but did your wheel problem get fixed??


Mel

So far so good. I have 'tripple' wired that wheel, after re-surfacing everything that I could. It has been holding together just fine. I still check it everytime I drive it!:rolleyes:

jdog:)

Naumoff 06-07-2007 03:38 PM
Quote:
Originally Posted by h2oman
Hey Guys,
I had been hearing a slight rattle for a while when my car was at idle. Couldn't figure it out until I tugged on the hood scoop today. The front was able to wiggle up and down just a hair. I used a 2.5mm hex key on top and 7mm socket underneath, tightened at least a full turn on every screw. Fired it back up, no more rattle. :MECOOL:
http://www.clubcobra.com/photopost/d...Hood_Scoop.jpg


I only snugged them down. Didn't want to take a chance on cracking the gel coat. :eek:

Also posted on www.backdraftboys.com
You need to stop doggin' that car!;)


All times are GMT -7. The time now is 01:20 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: