|
Side Pipe Gaskets
I have an early BDR which has the 6 bolt flange for sidepipes to headers, where can I purchase these?
|
You can use hi-temp silicon.
|
gaskets
I made my last gaskets out of laminated aluminum from McMaster. It's .002" aluminum layed to .048". I cut a piece (6"x6" + -)and laid it on the side pipe flange. I use an awl to mark the out side and a transfer punch to mark the holes. Cut and drill. I also have tried the red hi-temp silicon with some success. I did use the hi-temp silicon with the new gaskets. Over 2000 miles and no leaks. I have tried Mr Gasket gasket, industrial gasket and several other gaskets. Most I blew out with in hours. The red hi-temp silicon last several months. I can sell you 2 pieces from the sheet that I bought. Cost about $4 each. Tell me the size you need if your interested in making your own.
Dwight algunruner@aol.com http://www.mcmaster.com/ Material Easy-to-Form Electrical Grade Aluminum (Alloy 1100) and Extra-Strength Aircraft-Grade Aluminum (Alloy 2024) and Corrosion-Resistant Marine-Grade Aluminum (Alloy 5052) Finish/Coating Unpolished (Mill) Type Laminated Thickness .048" Length 24" Width 24" Tolerance Standard System of Measurement Inch Material Certification Without Material Certification Application Shim Stock Specifications Met Not Rated Laminated Layer Thickness .002" | .003" These 2 products match your selections Laminated Layer Thickness Each .002" 9574K17 $48.37 .003" 9574K32 56.07 |
| All times are GMT -7. The time now is 09:59 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: