- -
wiring question
(
http://www.clubcobra.com/forums/backdraft-racing/86136-wiring-question.html)
| FST FOX |
03-18-2008 10:48 AM |
wiring question
I know I should have labeled everthing but didn't, can't find the home for the open ended wire, 2 wires in the pic, one goes to the oil sending unit, the other goes to ??????
http://i31.tinypic.com/2nsusxu.jpg |
| JRoss |
03-18-2008 11:23 AM |
I think those wires are for oil pressure and oil temp.
John
|
| FST FOX |
03-18-2008 12:56 PM |
I must be missing something because there is nothing to hook it to
|
| rocket7171 |
03-18-2008 03:47 PM |
wire
Tach going to coil?
tom
|
| woody2 |
03-18-2008 05:17 PM |
horse-shoe end to oil presure. then start your car and see what works or
not. :D
Bruce
|
| Speedysnake |
03-18-2008 07:05 PM |
Flat spade connector on white / green wire should be for the VDO oil temp. sending unit. Mine is mounted on the same port the oil pressure sending unit is located.
|
| FST FOX |
03-18-2008 07:38 PM |
Quote:
Originally Posted by Speedysnake
(Post 826040)
Flat spade connector on white / green wire should be for the VDO oil temp. sending unit. Mine is mounted on the same port the oil pressure sending unit is located.
|
great can you attach a pic? or send me one clay.insurance@gmail.com |
| FST FOX |
03-18-2008 07:40 PM |
btw, the open connection is black with red
and the other is white with green
|
| flipscobra |
03-21-2008 08:42 PM |
it might be for temp sending unit in the block unless you have a mechanicel gauge.
|
| Rwillia4 |
03-21-2008 11:24 PM |
FST FOx- The VDO Oil temp send unit could be screwed into one of the spare ports near the oil pressure sending unit. The Oil temp does not have a male spade fitting it has a tip that comes out of the gauge. the connector fits onto it sideways.
|
| All times are GMT -7. The time now is 11:03 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
