|
engine upgrade
I have a 351 windsor, i am planning on converting it to a 408 with a stroker kit. Has anyone out there done this mod? Should i be aware of any issues that may arise, especially overheating?
Thanks, Bob |
Bob,
You may want to repost this in the SB engine section. I am sure it will get more visability and more responses. Good luck |
Lots of guys have done that, common as water. Do it..
|
He's right. It's a very common conversion. Don't be afraid to do it.
The only thing you really need to check is oil pan clearance. Depending on the parts used, there can be a small interferance problem with the #8 rod and a Canton pan. It's not much, only about 1/8" or so. After you get all the pistons installed, put the pan on without a gasket. Spin the crank a couple of times. If it hits, just make a small adjustment with a hammer. |
Just a small clarification to the above .....
When making the adjustment with the hammer ... adjust the pan not the crank:3DSMILE: One option will work .... the other option ..... won't **) and a final clarification to the clarification .... make sure you don't crease the pan or have a tight fold when the metal could develop a fatigue crack. |
| All times are GMT -7. The time now is 07:05 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: