Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Bay Area Cobra Club (http://www.clubcobra.com/forums/bay-area-cobra-club/)
-   -   Alice's on Saturday 11/15? (http://www.clubcobra.com/forums/bay-area-cobra-club/92969-alices-saturday-11-15-a.html)

Greg tripp 11-15-2008 11:09 PM

Gene,

It's funny you say that as a couple months ago I took a coat hanger under the passenger seat and found things that just "went missing". Need to block it off somehow so things wont just slide under.

PANAVIA 11-16-2008 01:54 AM

Doug, --Any help you need, let us know.

I would be happy to help you listen.

did you go over any decent bumps >? is it a loose windage tray >? is there any additional vibration (engine shake) with the noise >? are all the pushrods straight>?

--Steve

tkb289 11-16-2008 02:30 AM

Doug,

Great drive and fun breakfast!

Sorry to hear about the noise, a compression check will tell you a lot ... maybe a valve lifter or cam lobe is the problem? Just guessing at this point. Since you have the valve cover off, maybe crank the motor a bit an see if it looks like the valves are opening and closing properly.

- Tim

vanoochka 11-16-2008 06:42 AM

Doug,

Warranties are beautiful things. Fingers crossed for a quick, no-hassle repair.

Chuck

csx wnab 11-16-2008 09:22 AM

gene. if you were to take some insulation foam. you know, like the stuff water pipes are wrapped with. that black foam like stuff. cut a piece and stuff it under the front of the seat. that way you can't see it and it stops stuff from slideing under

Got the Bug 11-16-2008 04:12 PM

Quote:

Originally Posted by tkb289 (Post 898320)
Sorry to hear about the noise, a compression check will tell you a lot ... maybe a valve lifter or cam lobe is the problem? Just guessing at this point. Since you have the valve cover off, maybe crank the motor a bit an see if it looks like the valves are opening and closing properly.

- Tim


Quote:

Originally Posted by PANAVIA (Post 898319)
did you go over any decent bumps >? is it a loose windage tray >? is there any additional vibration (engine shake) with the noise >? are all the pushrods straight>?

--Steve

I had a chance to check the compression today and it looks good (190 to 195 for all cylinders). I checked the basics and found no oil in the water or water in the oil. I also drained the oil and it looked fine. I replaced the oil/filter and started it up again this afternoon. The engine started right up, no shaking, smoke, or anything unusal...except for the knocking sound.

Since it's under warranty, I'm not going to turn any bolts. I've got a call into the Roush dealer in Reno and I'll go from there.

gene giambona 11-16-2008 10:09 PM

Doug,

Glad to hear the compression readings looked fine. I know you don't want to do any wrenching because of the warranty, but you could easily remove the spark plug wires (one at a time) and while the engine is running check to see if the noise goes away. This process could help identify which cylinder is causing any noise you hear if the issue is piston/rod related.

CSX WNAB,

Thanks for the great advice. I'm going to give that a try.

Greg,

I was using the Cobra seat "coat hanger tool" as well. What a pain!:CRY:

alving 11-22-2008 12:16 AM

Hi all,
My name is Alvin. I am trying to find a Cobra owner that I met at ZCarGarage tonight for the unveiling of the Nissan 370z...

I am the owner of the black Datsun 2000 roadster with the "No MG" sticker on it that was being dyno'd.

Just wanted to know if I'm in the right club that does runs to Alice's and allows a small following of non-Cobra cars like Alfas, Healeys, etc.
my e-mail is alvingogi@hotmail.com

Cobras rock!

PANAVIA 11-23-2008 03:21 PM

Alvin, that would be Me -- Steve.

Good to meet you and know that you are a Petrol head like me / us.

Guys you will like Alvin and his 67 Datsun 2000 fits in with our alices crew very well.

you have to see this thing, it is quite cool.

Alvin-- I will send you a PM.

Steve

Greg tripp 11-23-2008 07:35 PM

Alvin,
Are you the Alvin that lives on Devonshire drive with the Black Datsun? I Married Lisa Hopkins, Your next door neighbor...( Hoppys daughter). I'm the one with the blue Cobra. I live on Alderbrook around the corner. Your always welcome to drive with us to Alices. Call Anytime Cell 813-4100

Greg

PANAVIA 11-24-2008 04:05 AM

--its a small world after alllll, its a smalll....

4pipes 11-24-2008 07:46 AM

Geez Greg.....
 
Quote:

Originally Posted by Greg tripp (Post 900016)
Alvin,
Are you the Alvin that lives on Devonshire drive with the Black Datsun? I Married Lisa Hopkins, Your next door neighbor...( Hoppys daughter). I'm the one with the blue Cobra. I live on Alderbrook around the corner. Your always welcome to drive with us to Alices. Call Anytime Cell 813-4100

Greg

The next thing ya know, you'll be inviting people with Vettes along for the ride.:D

Greg tripp 11-24-2008 11:51 AM

Quote:

Originally Posted by 4pipes (Post 900065)
The next thing ya know, you'll be inviting people with Vettes along for the ride.:D

LOL, Bad enough that you led the way but then having the pictures taken with your car???! I'm going to have to have a talk with the other Presidents about this!!!!
:confused:

RodKnock 11-24-2008 12:59 PM

Sheesh, next thing you know, you'll be inviting p-cars too.

RodKnock 11-24-2008 01:03 PM

By the way, is there any interest in cruising around on any day this long weekend? I would like to get er out there if I can and I need an excuse. Maybe a pre-turkey feast cruise?

Randy Rosenberg 11-24-2008 02:05 PM

Quote:

Originally Posted by RodKnock (Post 900149)
Sheesh, next thing you know, you'll be inviting p-cars too.

Would that be Porsche or Porcupine? Kinda reminds me of a joke I heard...**)

BTW, I'm up for a cruise either Saturday or Sunday - gotta work these 3 days, and then taking in the International Auto Show on Friday.

Greg tripp 11-24-2008 03:40 PM

Where's the show at??

Randy Rosenberg 11-24-2008 03:51 PM

Moscone Center SF - http://www.sfautoshow.com/


All times are GMT -7. The time now is 02:39 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: