|
C-4 Suspension
I am changing my front suspension from the original fiber spring/sway bar to coil/over Aldan adjustable shocks. I have the E-M with a 502 GenVI/ 6-speed and all C-4 suspension. The front end was way to "stiff" using the stock set up so I am going with coil/overs and 300 lb springs to start with. Has anybody already done this and if so, what spring did you use?
Thanks, Jim |
I guess I haven't checked the forum in a while. I asked this same question in the Tech Tips forum a while back. Rather than misquote anyone try searching for my id, doitover. The subject was something about EM front springs.
doitover |
| All times are GMT -7. The time now is 03:48 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: