![]() |
Alignment Settings
I didn't build my CRL so I'm not sure what the front suspension is from it has a static toe-out condition so I want to get it on an alignment machine. Does anyone know what the toe should be set at? Is the camber adjustable? If so what should it be set at. I was told I have a Pinto steering column, can I assume a Pinto front suspension?
Dave |
Dave, All the CR cars use the Mustang II front suspension. Doesn't matter if it's tubular or stock they all use the same alignment specs which are as follows.
Caster 3.75 degree +/- .5 degree Camber 3/8 degree +/- 1/8 degree Toe-in .03 - .06 (1/32 in. to 2/32 in.) Don |
I'm outa here
Thanks Don, I have a hardcopy of your specs. and am heading out to Harolds Fram Shop.......
|
| All times are GMT -7. The time now is 12:58 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: