|
wheel bearing
Hi,
I am from Germany and I own a Classic Roadster. Right now a wheel bearing on the front side is broken but still fitted. Now I want to replace it butI do not know what type it is and who is the manufacturer. So the german part house needs to know what type of axle,stabiliser is built in so that they will be able to find out the type of the wheel bearing. I attached some pictures maybe someone can help me. Thank you Thomashttp://www.clubcobra.com/forums/pict...d=1149&thumb=1 http://www.clubcobra.com/forums/pict...d=3285&thumb=1 http://www.clubcobra.com/forums/pict...d=3286&thumb=1 http://www.clubcobra.com/forums/pict...d=3287&thumb=1 http://www.clubcobra.com/forums/pict...d=3288&thumb=1 http://www.clubcobra.com/forums/pict...d=3289&thumb=1 http://www.clubcobra.com/forums/pict...d=3290&thumb=1 |
74-1978 Ford Mustang II.
Remove the bearings and races and check the numbers, shouldn't be too difficult. Timkin is a very good brand. |
Thomas,
There should be a part number stamped on the bearing. Your parts house should be able to cross referance it. If they can not then post that part number and pictures so we can help you. It should be late 70's to early 80's Ford Mustang II but you never know who changed what at one time or another. |
The only thing in question pertaining to the MII (Which it should be) is the 5 lug rotors-wonder if anything else was changed?
|
We have ordered the spareparts for MII and fitted.
Everything functions perfectly Thanks a lot Thomas |
| All times are GMT -7. The time now is 03:26 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: