|
QuickJacks
Hi, Looking for front and rear quickjacks for my classic roadster ltd.
Bought a set from Shell vally and the holes are to close. Thanks Bob Wisconsin |
What spacing do you need?
|
Quickjacks
Hi, Looks like 3.5 in o.c. Shell vallys are 2.5
|
Take a piece of copper or flatten out a piece of copper pipe and clamp it on the back side of the jack. Make sure the hole is cleaned up and then weld up the holes. The copper on one side will mostly keep the weld from sticking and will make the weld pretty flat on the bottom side. Grind the weld flat and smooth with a flap wheel. Measure and drill the holes where you want.
|
Quickjacks
Thanks but I have chrome ones and plan on sending them back. I'll try to see if shellvally can get me a set unchromed with no holes in them. Or try to find someone to build me a set.
|
Piperj3,
I have a set of steel ones that I fabricated. I made a few sets. Some of steel and some of polished stainless. You can look in my photos for a blueprint that I posted or you can search for MASNAKA and he has a set of the polished stainless ones. These are made to fit a CR. I only have the one set left and I do not plan on making anymore. Anyone can copy the blueprint and have them made or I will sell my last set for $50.00 + shipping. Let me know if you are interested. Here is the set of polished ones on Masnakas CR http://www.clubcobra.com/photopost/d...865_Large_.JPG Here is some on the front of mine http://www.clubcobra.com/photopost/d...0066_small.JPG |
Those are real purdy, I would jump on them.
|
Thanks Terry,
They still shine like brand new and I am still very happy with them. John |
By the 4th or 5th time you take some skin off of your shins whenever you walk around the car you'll wonder why you wanted them in the first place!
|
piperj3 - Give me a call. Our stock quick jacks are different than the CR quick jacks but I also have quick jacks that fit the CR's. I've got the overriders for the CR's as well.
Dana 888-246-0900 |
Terry's pieces are quite nice and a bargain IMHO. Very robust and excellent quality. I had my steel pieces powder coated black.
|
| All times are GMT -7. The time now is 07:50 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: