|
Need more help ?
Been getting closer to getting my CR operational, but have discovered that I'm evidently missing the turn signal lever and the tilt column lever. I have the GM column. The tilt lever seems to just thread into a fitting in the column, but the turn signal lever appears to use some other means to attach it ? Does the wheel have to come off ? Also would you think these two levers would likely be available somewhere ? Does the turn signal lever also have a switch and wire harness attached to it ?
Thanks for any input here, Ronnie |
The steering wheel does not need to be removed to attach either the turn signal or tilt stems on GM column. I have a turn signal stem for sure; and maybe a tilt stem. PM address for mailing.
Jeff |
| All times are GMT -7. The time now is 05:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: