|
Factory or After Market Radiator?
I recently bought and am trying to finish an original Classic Roadster.
Does anyone have a factory radiator for it or have the dimensions of the original so I can have one built? Please feel free to share any after market units that will work also. Thanks in advance! |
They're all after market...I'm not sure what engine choice you're going with, but you should just take a few measurements and install the largest you can fit in there, you can't overdo it. Call Griffin.
|
I have the original CR drawing for a big block radiator. If you email me I can send you a copy. I gave the drawing to a place in Atlanta and they custom built an aluminum one for me. I know they now offer the radiator as a catolog item. I would have to search my stack of receipts to get the name and address.
|
Dave,
I used a Griffin radiator from Summit. 26x19x2 dual core. My 500 horse small block stays cool. Your part number will depend on size and location of your inlet and outlet. Good luck with your build. -Greg |
I found my paperwork. I sent the original CR drawing to Brice Thomas Radiator in Alabama (800-223-4299). They are affiliated with CG&J Inc. They did an excellant job
|
One of the best radiator men in the business is in your back yard. Arts Radiator did a fantastic job on my Cobra radiator. Completely hand made aluminium radiator for my FE 427. Not one single problem in ove r6 years. He also made one for my Daytona Coupe a couple of years ago.
Art's Radiator & Welding Shop in Flemington, New Jersey 08822 908- 782-8944. 67 New Jersey 31, Flemington, NJ 08822 Clois Harlan-Tulsa OK |
Radiator
Quote:
|
Thought I would resurrect this thread. I found as stated above, Brice Thomas Radiator.
Ralphy |
Could you send me the specs if you still have them?
Thanks |
i bougth a northern radiator #205151
it should fit between the frame rails
|
You all do realize that the topic was started in 2012 and the latest reply (before this kick) was 2014...
|
Looks like here in the future I have one and will edit and add a photo of a CR radiator and support with exact dimensions tomorrow.
I don’t see this info in the thread…. solution is to add it now. |
|
| All times are GMT -7. The time now is 04:21 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: