|
Wish list - Classic Roadster Missing Parts
Thought I'd check to see if anyone has any of these sitting around:
Side vents Black Side Curtains Black Carpet Glove Box Probably other things I'm not thinking of, but this is a start. If you have any of these, please send me an email or PM. Thanks for your time. MC |
MC,
Just in case you didn't know, all that parts you have listed are proprietary parts for a CR. None of your listed parts will swap out to FF, Everett Morrison, Shell Valley etc.. As far as the vents go, most will work but will need some modifications to the body. DV |
http://i13.photobucket.com/albums/a2...psf34935b0.jpg
Is this what you're looking for? If so, I'll FedEx it to ya for ten bux. I have no idea what that second piece of metal is for, and I'm not sure if it's part of the glove box assembly. But I'll throw that in the box, too. I built a Classics Roadsters Cobra about 12-13 years ago, and this is left over. |
Bob,
That little metal plate is for the License plate/light support. Goes between the body and the license plate holder. (Another little item never mentioned in the build manual!.) DV |
Thank you, bobcowan. I'll take it. Sent you a PM.
DV, as always, thanks for your input. Anyone else have left overs? I don't know what I don't know, so I may need your spare parts as well. Thanks. |
I have door hinges and a complete pedal assembly for a manual trans.
|
TCRIST, Would you happen to know the ratio on the brake pedal of your pedal assy? The one I have seems to be a bit too small of a ratio to run manual brakes. Thanks.
|
Looks like 4 to 1.
It is 10" from the center of the pivot to the center of the pedal and 2 1/2" from the center of the pivot to the center of the hole for the clutch cable. |
Thanks for checking, TCRIST.
Sounds like your pedal assy is what I have. I believe something more in the 6:1 ratio is recommended with manual brakes. Thanks again. |
Checked online and you are correct on the ratio depending on the master cylinder bore size, see link.http://www.mpbrakes.com/uploads/docu...alratiopdf.pdf
Re calculating my assembly (I measured the clutch pedal not the brake pedal). The brake pedal is 12" from pivot to center of pedal and the brake rod hole measured 3.75. Which equals a 3.2-1 ratio. My pedal assy is probably still the same as yours, just trying to get the correct calculations. |
M-C,
Don would change the 6:1 ratio by re-drilling the mounting holes in the pedal box for the pedal. Now you need to know your geometry---Not for me at this tender age! :rolleyes: DV |
I have quite a few parts for the CR around. And can recreate almost any part. A lot of our parts can be used to upgrade your CR as well. Cheak out my Gallerie to see the parts.
|
I changed the brake pedal ratio by modifying the existing pedal. Pictures in my gallery if that helps.
Sorry no spare parts. John |
| All times are GMT -7. The time now is 02:32 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: