|
Front brake hose too long.. Rubs on the wheels.
Using the Mustang II brakes.. The brake hoses appear too long as when I turn the wheels, they rub. Looking at pics of the mustang ii setup, it looks like the dust shields would help route the lines away from the wheel.
Was the expectation that the dust shields were also to be used? Otherwise are there shorter lines to be used, If so, what car? |
I checked my front brake hoses and they are 16" stainless...no dust shields and no rubbing. What length are you using?
|
Wire ties or clamps
Wisconsin_Snake Wire ties to the "A"arms work great or getting plastic clamps and screw them to the arms. I like wireties first. Need to check FULL range of travel after ties done. If still have a problem, find a hydrolic shop that will custom make a set of cut yours to fit. THey sell front brake hose stainless steel kits that work great and might be the right length. Rick l.
|
Per RockAuto they are 16-11/16
I will try wire tires first (and ensuring that they can still travel freely). With the dust shields AND the rims being MUCH narrower on the Mustang II, I bet it was never a problem on the older cars. Thinking about it I like the idea of having a dust shield, any ideas where I could get a set? |
Try EBAY might find a set that fits....79 80 81 82 83 84 85 86 Ford Mustang Front Disc Brake Dust Shield Plastic Vent | eBay
|
Quote:
I am considering it though.... |
If you use wire ties get some 1/2" rubber hose maybe 3" long then take a razor knife and slit the hose long wise then wrap around the brake lines, then use the wire ties over rubber hose that way you won't be rubbing a hole in your brake line. It will happen if you don't use something to protect the lines.
|
| All times are GMT -7. The time now is 04:23 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: