Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Gilmer pulley Kit (http://www.clubcobra.com/forums/classic-roadsters-ii/137222-gilmer-pulley-kit.html)

jtubbs 09-16-2016 02:04 PM

Gilmer pulley Kit
 
I have been looking at Gilmer pulley kits for a couple of months. I would appreciate any feed back that any one has. Application will be 302 with mid mount alternator. (three pulleys) Also, any info on these mid alternator mount kits. I am replacing Timing chain cover, water pump, alternator, alternator mount kit and Gilmer pulley kit, and thermostat housing. All in polished products.
Please include successful parts that you have used. And no, No's
Thanks

Big Mark 09-16-2016 04:55 PM

if you are doing it for the noise , you really cant hear it with the pipes

Wisconsin_Snake 09-16-2016 06:12 PM

Quote:

Originally Posted by Big Mark (Post 1403650)
if you are doing it for the noise , you really cant hear it with the pipes

I bet he's doing it because it will look cool...

jtubbs 09-16-2016 08:09 PM

Quote:

Originally Posted by Wisconsin_Snake (Post 1403658)
I bet he's doing it because it will look cool...


yep--the cool thing

RedHawk 09-16-2016 11:24 PM

I honeslty dont know for sure whether I have gilmer pulley kit(bought car with them already installed) but I'll check in am.

Btw, you can definitely hear them over pipes. They have a gear wine very similair to a super charger. Definitely cool looking and sound good too. I also have a 351w with edlebrock aluminum heads 2.02 1.60 rollor rockers and a seriously lopey cam.

vector1 09-18-2016 07:28 AM

try these guys, lot of help and good stuff.

Jones Racing Products, Inc.

Tommy 09-19-2016 04:25 AM

All I can add is that my car was equipped with Jones Racing gilmer stuff when I bought it. It was a retired race car that was converted for street use. I've run them for 15 years with no problem. And yes, my exhaust is too loud to hear them.

jtubbs 09-24-2016 10:18 AM

Gilmer for Small Block
 
Thanks Guys

jtubbs 03-02-2017 03:23 PM

Well just finished the Gilmer Pulley, mid alternator, duel oil filter, and AN10 oil cooler project!!! I would attach a photo, but don't know how. Any help?

LoBelly 03-02-2017 07:17 PM

Quote:

Originally Posted by jtubbs (Post 1417150)
Well just finished the Gilmer Pulley, mid alternator, duel oil filter, and AN10 oil cooler project!!! I would attach a photo, but don't know how. Any help?

http://www.clubcobra.com/forums/aust...ng-photos.html

;)

LB

jtubbs 03-03-2017 10:06 AM

Thank you LoBelly,
So much data, that it will be a project.
Mine is yellow too, love being a monority


All times are GMT -7. The time now is 06:59 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: