|
Group Buy for Classic Roadsters Cobra rollbars
I am trying to organize a a group buy to get a couple roll bars made for the Classic Roadster cobra based of the following diagram.
Tubular Techniques has quoted $368 for the first roll bar and $265 for additional ones (for the entire group buy). --- So the more we order, we can drive that initial price down. Unless if I am wrong, this is "plus shipping" via UPS. Note that as we build the number of people willing to participate. I am going to contact a couple of other places to see if we can get better pricing. Please let me know if you are interested/committed and if you want one or two roll bar hoops. Note that ends are to be left long for others to trim; no plates, nuts, or welding are included. Thanks http://www.clubcobra.com/forums/pict...ictureid=15854 |
I'm In!!!!! LDMOORE@COMCAST.NET 916-677-6621 - *Both driver & passenger roll bars
|
had two roll bars made at Cintube of Montreal, Quebec,Canada...made of .120 stainless steel and bend perfectly with no distortion...I had to buy a full length of tube so I had two made...two hoops and two braces and had them delivered to Fredericton,New Brunswick,Canada for 265.00 Canadian...yes 265.00...with the dollar it would be worth looking into...the first roll bar was around 200 and the second was just the time it took to make were I had already bought the tube...I fish mouthed the short tube myself and had a local guy stainless steel weld it on...PERFECT...had two made in case they didn't match the one already on the car...steve
|
Thanks 133bus for the tip on Cintube of Montreal!
I myself would prefer stainless as it can be polished saving on chroming steel plus the price seems better! I will contact them. |
I went through Michelle Dion at Cintube a year and a half ago in Lachine Que...514-634-3592...mine was 1 1/2 tube...the only thing was they don't set up shipping for small orders so I contacted a shipper and had Cintube package them..put a photocopy of the shipping info and number on the package (they where more than happy to help me) and had the shipper pick it up...got it in two day no problem... steve
|
How would people feel about getting Stainless steel instead??? :eek::MECOOL::eek::MECOOL::MECOOL::3DSMILE:
I contacted a place locally to me. If I am reading the quote correctly.. If we order stainless steel hoops (2 inch, .120 wall 304 Stainless steel #4 SPUN BRUSHED FINISH) 4 @ $350 each 5 @ $315 each 6 @ $293 each + Wisconsin state tax and shipping. On the quote: "NOTE WHEN BENDING STAINLESS THE MATL WILL SPRING WHICH AFFECTS THE 14" DIMENSION - COULD BE UP TO A 1/2" LARGER" I have a couple questions to ask of him yet, mainly insuring that the fish mouth coupler is included and has the 2 semi circle cut into it. That will probably happen Monday. |
Wisconsin Snake and others- I run a fully equipped race car fabrication facility and could easily turn these out under $225.00 ea. less shipping. Material would be 1 3/4" x .120 dom bent on a 6" centerline radius to yield a bar 13 1/2" outside to outside. This would include tube coping and downtube. I am located in the Minneapolis-St Paul area and have serviced the racing industry since the mid 70's and Cobra service since 2002. Mike
|
So if I am reading it right it would be 14" above the body based on measurements? Would that be a stock height or one to clear helmets? What about hardtop clearance? Granted I am late to the party but in my digging through the forum didn't DV have a tubing bender? Would it not make sense to, if he was wiling make them as he is the resident expert? or NRP? Just asking I do not know.
P.S. I'd be interested in both, although I really hate the look. Just doesn't look right with two to me. |
Everyone please send me a PM with your contact info so I reach out to you.
|
74proii, 14 would be the outside radius of the half circle so it should be much higher I thinking. I am guessing 18 inches.
|
| All times are GMT -7. The time now is 11:58 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: