|
Brake Hoses help needed
3 Attachment(s)
Hello, need your precious help again...
I have to replace all brake hoses and need some help. I have these codes on hoses : SAEJ1401 GY-1/8-5021 04/10/87 AE - DOT-GY-04/87-1/8 HL SAEJ1401 GY-1/8-5021-09/03/89 BE - DOT-GY-09/89-1/8 HL SAEJ1401 GY-1/8-5030-01/31/89 AD - DOT-GY-01/89-1/8 HL (on pics is the one with metal bracket) tried NAPA... online site don't list them and they can't do research as they don't ship to Italy any suggestion ? thanks Marco |
what calipers and or whatever are they attached to?
|
Merlin,
If you have a brake shop there it would be cheaper to have them make you some hoses and clean and use those fittings on them. Any good brake shop will have the hydraulic hoses and should be able to cut them to whatever length you need and either use the old fittings or put new ones on them. Ron |
I would make my one stainless braded ones using components from Chassis Engineering INC. Look like stock Mustang ii brake lines:
https://www.autozone.com/brakes-and-...20_99196_12551 https://www.autozone.com/brakes-and-.../118398_0_1903 I've seen those before, but fitment escapes me. I assume you have an 8.8 rear? https://www.autozone.com/parts/brake.../753368_0_1903 |
besides axle size, disk or drums out back
|
Thanks to everybody I got solution
All brake hoses from 1978 Mustang II Brake cylinder master from C3 Corvette |
| All times are GMT -7. The time now is 01:39 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: