- -
Tarus fan
(
http://www.clubcobra.com/forums/classic-roadsters-ii/141023-tarus-fan.html)
| Bulldog |
06-05-2018 05:22 PM |
Tarus fan
Does any one have any info. On Tarus fans for cooling problems .MotorHead said he though where were some threads on it. can't seem to find any. Thanks Bulldog.
|
| Mark IV |
06-05-2018 06:23 PM |
Quote:
Originally Posted by Bulldog
(Post 1445723)
Does any one have any info. On Tarus fans for cooling problems .MotorHead said he though where were some threads on it. can't seem to find any. Thanks Bulldog.
|
Try "Taurus" and see what you find. |
I have one in mine... What do you want to know??
|
| saltshaker |
06-06-2018 06:01 AM |
Tauras Fan
I run one and use it with a Volvo relay and a BMW dual temp sender...simple and works great!
Jon
|
| MOTORHEAD |
06-06-2018 10:03 AM |
Bulldog: use search function on top of "portal" page. just type in taurus or taurus fan and hit GO. you must be logged in for this feature. My postings are in with the thread by Phil Minotti, #10 from top. Titled :Taurus fan in a Kirkham,
Ted
|
| Bulldog |
06-06-2018 11:51 AM |
Fan
Thanks everyone for info. I got to get this thing back on the road! And get it cooling better.
|
| Bulldog |
06-06-2018 12:07 PM |
Tarus fan
Undy , thanks for reply. Just would like to know what size fan you used on what size radd how difficult job it s any help would be appreciated Thanks.
|
| studebaker53 |
06-07-2018 09:32 PM |
In my CR with a big block I used a fan out of a 1995 Ford Thunderbird that came with the V-8 and air conditioning. I never have a cooling problem in my CR. I had to cut some of the tabs off to make it fit but it did slide right in. Awesome fan. More powerful than the Taurus. Good Luck.
|
The high volume Taurus fan that's needed comes out of a 90-91 Taurus with the 3.8 in it. The 3.0 motor has a smaller (less CFM) fan in it. The correct fan is 17", while the "really powerful" fan comes in the Lincoln LSC. It's a 18" fan but it typically is too big for most Cobras. The integral fan shroud, depending on application, will require some shroud carving for a custom fit.
|
| Bulldog |
06-08-2018 11:33 AM |
Fan
Thanks Studi and undy, great ininfo.just what I need to know.
|
| All times are GMT -7. The time now is 11:20 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
