![]() |
Making progress
2 Attachment(s)
After 3 months of sorting out unfinished kit I have a few items taken care of;
. -made passenger door hinge and mounted, latched both doors( no small feat as had to be extra careful because car is painted) . .-mounted gas tank and lemans filler. . -modified mustang pedals and mounted them. . -modified mustang power brake system, installed new master cylinder and brake lines. (had to fix 7 bad items in brake system) . -made brackets and installed steering column .will move on to the dash next. .Perry:MECOOL: |
Looks like you have the door lined up about perfect...
I am happy you got the car and good luck with the rest of the build! |
Ditto, to Wisconsin Snake's Comment. If you need anything else from us guy's, we're here for you, Cheers Tom.
|
Hood done
1 Attachment(s)
Hi,
Had to cut out hood scoop air intake and touch up paint. Also made hood hinges, mounted it and installed latches. I like the size of the scoop. Also installed wiper motor and wiper boxes. Perry:MECOOL: |
Its looking great! I like the way the color highlights the curves.
Every time I think I will finally will have time to get going on mine to finish, something else sucks up the space/time. Did you change the operation/location of the clutch & brake pedals? |
pedals
1 Attachment(s)
Hi,
I used 1990 mustang pedals and shortened the clutch side 3/4" and moved the pedals left that much to clear the steering column. The brake was in the same spot. Made gas pedal bracket also. Perry:MECOOL: |
That all looks more normal than mine. My clutch pedal is very high off the floor. And it would be impossible to heal/toe.
|
| All times are GMT -7. The time now is 11:48 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: