|
Need Verification of Rollbar Mtg Holes
I am ready to cut the holes for mtg the supplied Classic Roadster Rollbar. I know it is classified as cosmetic but I like the look of it. I do Not have the original supplied template or location measurements. I positioned it as I think it should be . I appreciate if someone who has one mounted could verify with a few tape measure dimensions. My locations are as such:
- From the edge of the cockpit the two from legs is 2.5” from the rolled edge - From the centerline of the car the first front leg is 7” and the second 19” - From the rolled edge of the cockpit the third leg is 9.5” and 16” from the centerline of the car I really would appreciate if anybody with the same Rollbar could check yours with a tape measure to see if my dimensions look correct. It would be a real pain to repair the holes if I was wrong. Thanks for any help |
I am a little concerned because the roll bar does not line up with the center of the seat. The dimensions from the centerline were passed on to me on a hand written piece of paper that came with car. I can not verify them. I am concerned because some time ago I saw a pic and if memory serves me well it looked like the outer most leg was in line with the rear suspension adjustment bolt head. My measurements would put the leg approximately.75 inches off the centerline of the adjustment bolt. The Rollbar leg is moved .75” towards the passenger side.
|
| All times are GMT -7. The time now is 01:19 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: