Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Prestige Motors Built me a motor for my CR! (http://www.clubcobra.com/forums/classic-roadsters-ii/146350-prestige-motors-built-me-motor-my-cr.html)

Hapnyny 11-01-2022 01:13 PM

Prestige Motors Built me a motor for my CR!
 
2 Attachment(s)
http://youtu.be/dKgfhkReNkc

Cobra is ready!

Suspension upgraded to tubular in the front with QA1’s and the rear was ARP and custom lower adjustable control arms, with QA1’s. C4 built for 600HP with manual trans body and a Lokar Vintage Shifter identical to the original 5 speed. Willwood brakes all around. Need to upgrade the radiator next. Enjoy the pictures and video link!

https://youtu.be/dKgfhkReNkc

brodie 11-01-2022 07:54 PM

Car
 
Hi I was looking at your car it’s nice looking. I have a question where did you get the vent.for the dashboard thanks

Hapnyny 11-01-2022 08:02 PM

Hi Brodie,

It came with the car when I got it. I think this was considered an upgraded dash from CR according to the shop manual I have.

Alfa02 11-01-2022 10:50 PM

Those vents (Which I had on my CR series 1) came in the kit, which are from a GM (Chevette, Monza, Vega) The dash also came with side vent's (round) from another GM car.

Roylerumble 11-04-2022 04:15 PM

more pictures please!!! Tell us more about the build, I'm getting started on mine very soon.

Hapnyny 11-05-2022 04:20 PM

2 Attachment(s)
It’s a 1992 CR1 has a sweet 289 that runs strong. Upgrading to a 347 so I can use the existing headers and side pipes. Front suspension is tubular from Heidt with QA1 Coil overs with two adjusting knobs. Upgrade the wheels and tires. Willwood 4 piston brakes all around. ARP rear upper control arms and a pair of adjustable lower control arms. C4 tranny with upgrades to hold up to 800HP. Upgrading the stall converter to a 3k when the new motor gets dropped in.

Rebuilding the rear end 8.8 with a Yukon differential and 31 spline axels. Also going with 355 gears as well. Looking at the radiator and trying to think of a good upgrade plus a reservoir that looks OEM.

Love building this car!


All times are GMT -7. The time now is 01:56 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: