Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Some help with a neutral safety switch (http://www.clubcobra.com/forums/classic-roadsters-ii/19248-some-help-neutral-safety-switch.html)

cs69er 08-07-2002 06:37 PM

Some help with a neutral safety switch
 
I just got my Lokar tailmount shifter today and it slipped in smoothly and looks great. My question now is about the neutral safety switch. My C-6 does not have any connectors for wiring the switch up. The Lokar has a neutral safety switch has two connectors at the side base. Don, DV or anyone else, what am I missing to hook the puppy up? How is this switch wired up? I have come to love this car but hate the s.o.b. who jacked it all up so now I'm paying the price. BUT- I can almost smell exhaust fumes!!! Thanks, Chuck

dscott 08-08-2002 07:48 AM

There is a 4 wire connector that comes off the engine side of the wiring at the firewall. Wires 121 and 126 are for the neutral safety. Wire those 2 wires to the Lokar switch. The other 2 wires in the connector are for the backup lights.
Don

cs69er 08-08-2002 08:50 AM

don, thanks for getting me started. i have a painless wiring setup, i'll call painless and find out which wires get hooked up. the tailmount shifter looks like a pretty nifty setup and sliped right on with no problems. the 10" shaft seems to be the correct height. chuck

cs69er 08-08-2002 08:59 AM

don,
for future reference on a painless harness, painless said just splice into the purple 919 ignition wire. pretty painless. chuck

dscott 08-08-2002 09:15 AM

I forgot you have a painless harness. The Lokar shifter is a nice piece. Let me know how far above the floor the 10" shifter sits.
Thanks
Don

cs69er 08-08-2002 12:42 PM

don,
the tailmount bolts up on the top bolts of the tailshaft. lokar said measure 3" from those bolts. it gives you about 7" above the transmission tunnel which looks pretty near a stock shifter.
chuck

Art Burtt 12-03-2002 12:24 PM

Don,
Where do you get your shifter boot and emergency brake handle cover?

Art

dscott 12-03-2002 01:43 PM

Art, I get them through Bethania garage. Talk to Tom and tell him it's for a Classic Cobra. Phone # 336-922-3018
Don


All times are GMT -7. The time now is 06:47 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: