|
Cam Bearing Change??
I'm going to install a more agressive cam in my 1986-87 302 (roller cam). Is it necessary to install new cam bearings?
Also do you know if my valve stem seals are the 3.8 umbrella type? Thanks, Dave |
It's not necessary to change the bearings unless they are worn. Look at them when you pull the old cam. There shouldn't be any grooves or gold material showing. Most of the stock seals are the umbrella type. Most of this depends on the heads. Once you pull a valve cover you should be able to look at the seals to see which type you have.
Don |
| All times are GMT -7. The time now is 01:20 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: