Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Can you modify the Speedo Cable? (http://www.clubcobra.com/forums/classic-roadsters-ii/19579-can-you-modify-speedo-cable.html)

Snake 08-19-2002 11:13 PM

Can you modify the Speedo Cable?
 
Does anybody know if you can modify a speedo cable from either Ford or Napa cables? If so would you happen to have the part numbers...I'm using a Stewart Warner speedo gauge..and do have the part that screws in the back of the gauge...just need to know the part number of a cable that I could use. It's easyer to modify then to buy one and wait for it to be shiped to me in Canada...to much time wasted.
Thanks Guy's
Snake.

427sharpe 08-20-2002 12:45 AM

Most cables are the same size on the drive end---there is a 'repair kit' available from NAPA (and HELP too I think) that is the internal drive cable itself and a crimping tool. Costs about 5 bucks. You can make the cable whatever length you like, just follow the directions and take your time. It might be easier to measure how long a cable you want and find an understanding parts guy to help you search the books for a stock one the correct length. NAPA's parts books are quite good for this kind of work. Hit the parts guy up on a slow day and bribe him with a six pack of his choice and you'll have a friend in the parts business for life---a good thing if you drive a Cobra! I think I ended up using one from a '66 Mustang automatic and it was the right length. Should be available from Canadian Mustang, yes??

Snake 08-20-2002 11:47 PM

427sharpe
 
Thanks Buddy....I will check it out....I've got a manual T5 trans...so I'm sure the cable will be different then your is. I had talked to the NAPA guys today and, they said there inventory is different then the ones in the states...go figure? All look threw the NAPA book and try to find the right one...or one that I can modify.
Thanks Again.
Snake.

Snake 09-02-2002 02:07 AM

Need Help looking for a Speedo cable!!
 
Hey Guys! Does anybody have a cable for a Stewart Warner speedo and would fit the Ford T5 trans!

Or maybe a speedo cable that I could just buy from a parts store like Napa. That would fit the T5 Ford trans and a Stewart Warner speedo gauge.

If so... do you have the part number of the cable....any help would be appreciated.
Thanks.
Snake

dscott 09-02-2002 08:11 AM

Finishline carries them.
Don


All times are GMT -7. The time now is 04:01 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: