|
Brake Light
Don:
Got some of the lights going, (i.e., tail, and turn) thanks for the head light wiring info. The manual said to connect wire 165 to the brake light switch and 166 is not used. There is no power to wire 165 or 166. The brake light switch I have is a two prong switch. I will assume that there has to be constant power to the switch? Is there a hot wire that I am missing or what? |
Don, use wire # 165 to the switch and wire # 116 for power to the switch.
Don |
Don,
Where is #116 located? Can't seem to find it on the fuse block harness. Thanks! Dwain NEVER MIND, found it :JEKYLHYDE All I had to do was look! **) :rolleyes: |
| All times are GMT -7. The time now is 09:48 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: