Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)
-   -   Side pipe options..... (http://www.clubcobra.com/forums/classic-roadsters-ii/55310-side-pipe-options.html)

JimP 07-04-2004 09:59 AM
Side pipe options.....
 
So, I installed my engine yesterday. :D I put the headers and side pipes on but the rear attachement for the pipes doesn't line up. %/ The pipes stick out about 2 inches from the frame mount and are about 2 inches too short. The also look too low in the back and would require I raise the transmission at the rear which I cannot raise anymore than it is now. I know this "Short" pipe issue was brought up before (can't seem to find the thread). Just wondering what my options are. I'm using a 351W with the lowered mounts and had planned on modding these pipes to replace the mufflers as mentioned in other post (DV mod, I think). Anyway, I could probably take care of the length issues when I replace the mufflers and slot the holes where they attach to the headers to adjust height, just wondering if new pipes exist that already have this mod that would work and save me some time.

Also, anyone create any kind of mount for the T56 Transmisson to adapt to the CR frame or do I need to get my welder out again? :MECOOL:

J. T. Toad 07-04-2004 02:46 PM
call Don, he will have some ideas for you

dscott 07-04-2004 08:05 PM
Jim, give me a call and we'll figure out where the problem is. 1-888-722-6272. We are closed tomorrow 7-5-04.
Don

JimP 07-06-2004 10:57 AM
Motor mounts in backwards....:o :o :o :JEKYLHYDE :3DSMILE:


All times are GMT -7. The time now is 06:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: