|
Yup yup you got it in right. I wonder, if it was upside down would you have 5 speeds backwards and only one forward? Maybe the place where they cut the firewall from the body isn't right. Mine sort of looked like the cut was the same. Is it possible to get a firewall from one kit and a body from another? You'd have to ask Don. Also I had to make a plate to bolt my Ididit column to the cowl bar. The threaded rod I used was sticking up about 1/4 inch too high. Once I saw where it was hitting I lowered the rod and the body fell right into place.Do you have the dash bolted in? Body
goes on, then dash gets bolted in. |
Art,
My firewall was nailed on when I got the frame. The column and dash are not installed so no clearance issues with those items. The body is tight against the cowl bar as well as the front frame sections. No contact and way too much clearance at the outriggers and the cross member under the package self. Hoping to get some clues by looking at another almost-completed car at Don's shop tomorrow. Dwain |
TC, I don't understand "nailed on" My firewall was sitting on th frame and the cowl bar was loosely bolted to the frame. I took the
firewall and cowl bar off to install engine and trans and to run wires and lines. Is the cowl bar bolted in the correct spot? |
Art,
...My feeble attempt to be cute. It was actually bolted on quite securely. Dwain |
| All times are GMT -7. The time now is 09:33 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: