![]() |
CRL Seats
I seem to have a problem with people fitting into the drivers seat of my Cobra. I have the seat all the way back where the seatback touches the carpeted inclined surface just below the horizontal (package-tray).. There is a few inches to go in the area behind the lower seatback. If I could change the angle of the seatback I could probably get the seat back further..
Is this possible?? Is the seat cushion easily removable? Thanks Dave |
I had the same situation sort of. Mine was the seat seemed to be layed back way to far for my liking. So all I did was shim up the seat using washers. Then I made a bracket that went from side to side on the rear of the seat. I was able to get a lot more leg room and have the seat sit at the angle I wanted. It didnt take to long to do.
Matt |
| All times are GMT -7. The time now is 12:59 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: