|
Brakes are hard
The brakes on my CR Cobra are very hard!It does seem
to stop well,but I have to use a lot of pedal pressure.The car has the standard mustang 11 front disc and rear drum.Non power brakes. There was a previous thread about relocating the pedal mounting for increased leverage.Does anyone have an update if that worked?I have a power brake unit that i will have installed. |
Softer pads may help.
John |
I would add the power booster. If the brakes stop the car you just may need the power assist. I don't have a new pedal for the manual brakes but I have redesigned the pedal for power. If you change to power you will need to change the pedal anyway.
Don |
| All times are GMT -7. The time now is 07:09 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: