|
Roll Bar Questions
The Roll Bar grommets on my 1991 CR Cobra
are dissolving ,and I would like to replace them. How hard is it to remove the standard CR cobra roll bar to change the grommets? Thanks in advance.:) Richard |
The roll bar is bolted in. The front legs are bolted in from under the frame cross member that it sits on. The 3rd leg is bolted to the frame behind the left rear wheel. We have a very nice aluminum dress up kit that replaces the rubber o-rings. We also have the o-rings if needed. You can call Pete for more info @ 1-888-722-6272.
Don |
Don
thanks for the reply.I`ll see if I can replace the grommets. Richard |
| All times are GMT -7. The time now is 07:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: