- -
brake valve switch?
(
http://www.clubcobra.com/forums/classic-roadsters-ii/77746-brake-valve-switch.html)
| d20180 |
03-31-2007 10:11 AM |
brake valve switch?
The brake valve(proportioning) on the firewall has a 2 pin plug on it(the pins appear to be wired together) and the harness has a blade connector How is this supposed to be hooked up? is there supposed to be a ground?
|
| dscott |
04-07-2007 12:11 PM |
On our old harness there was a wire specifically for the brake warning light that went to the prop valve. That wire was # 156 and is blue. The 2 pins on the valve are wired together. You would need to find an original connector and splice it in to wire # 156. I've never used that circuit. I used the manual adjust prop valve and they don't have a warning switch. On a used switch the light rarely worked anyway. I always figured I would know if the brakes were failing so a red light wouldn't tell me much anyway.
Don
|
| All times are GMT -7. The time now is 05:09 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
