|
5" LaMans fuel cap and spillage well (NEEDED)
Anybody know where I can get a 5" LaMans-style fuel cap and the spillage well? I can probably get by without the well. I can have my body guy make one if I have to.
Thanks, Ed |
|
I have dimensions for the well, PM me if you need them.
|
Thanks guys!!!
Mickmate...PM on the way Ed |
Ok...
Just talked to my body guy and he said making a spillage well without a mold or something to go off of would be pricey. Does anybody sell the small 3.5" cap with the spillage well? Thanks, Ed |
OK I have an embarrasing scribble with accurate dimensions that I will redraw. In the meantime lets be innovative hot rodders and start looking for pans that taper out instead of straight up sides and have a 6" diameter base. I'm actually going to cut mine out of the body (gasp!) as I'm building a street car. I was thinking of pulling a mold off it and it looks like it might be helpful to a few of yous fellas.
|
Still a problem?
If anyone has one I can borrow for three days I will make a clay mould and fiberglass one up for cpteddie. No damage will be done and I will immediately return mail it. DV |
Thanks DV...
I actually have 2 now. 1 from CRII and 1 from Jeff Classic down in AZ. Jeff's looks better than the one from CRII, so I'm going to have my body guy work that one into the fender. Ed Quote:
|
I put a dimensioned drawing in my gallery. If you can't read it let me know.
|
I fabricated my own out of aluminum in my English wheel.
If you can make me some type of pattern, maybe I can make one for you http://picasaweb.google.com/rbrayzz/...73145506646210 |
Spillage Well
Capteddie,
Do you still have the extra spillage well, and if so would you be willing to part with it? That's the only thing I have ordered from CRII that I can't source elsewhere. Thanks, Greg |
| All times are GMT -7. The time now is 12:34 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: