- -
Rear Brake Calipers
(
http://www.clubcobra.com/forums/classic-roadsters-ii/87313-rear-brake-calipers.html)
| Buzz Gehle |
04-29-2008 05:04 PM |
Rear Brake Calipers
Back in 99 I bought a mustang rear end assembly, among other parts from Don at Minnesota Classic Motorsports for my CR kit. I need to replace the Right rear caliper. Any help with a part number would be appreciated. All I know is 8.8 3.55-1 ratio. Caliper appears to have an 89 casting number on it.
Thanks all!
|
| Rick Parker |
04-29-2008 05:42 PM |
I think a lot of that stuff was also used as OEM on Tbirds and even Taurus and Crown Vics and was adapted to Mustang usage. Do a little homework on piston sizes or caliper rebuild kit compatability.
|
| All times are GMT -7. The time now is 11:55 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: