Club Cobra - Having a hard time sourcing one of the last few parts I need

Club Cobra (http://www.clubcobra.com/forums/)

- Classic Roadsters II (http://www.clubcobra.com/forums/classic-roadsters-ii/)

- - Having a hard time sourcing one of the last few parts I need (http://www.clubcobra.com/forums/classic-roadsters-ii/88439-having-hard-time-sourcing-one-last-few-parts-i-need.html)

Having a hard time sourcing one of the last few parts I need

Ok.

I've been able to find just about everything I (or DV) need to get the car done. One of the last things I'm having a problem finding is the side vent louvers.

Anyone had any luck finding some that will work with a CRII?

Thanks in advance!

Ed

Capteddie,
Not sure if this is what you are looking for, but this is one source if it is.

http://www.finishlineaccessories.com...4acc17d7727e89

Good Luck,
Steve:3DSMILE:

Quote:

Originally Posted by Seagull81 (Post 852189)

Capteddie,
Not sure if this is what you are looking for, but this is one source if it is.

http://www.finishlineaccessories.com...4acc17d7727e89

Good Luck,
Steve:3DSMILE:

Thanks...

I've been told the ones from Finishline will not fit a CRII. Have you used them in a CRII?

Ed

http://www.snakebite.com.au/sidevent...pair-p-38.html

They are in Australia so they may take a while.

http://000-0146.jpg Hey capt I am new to posting pictures on this site hope it comes through, my side louvers from crII are very " SIMPLE IN HOW THERE WERE MADE"
THEY ARE STAMPED OUT OF VERY THIN STAINLESS STEEL AND BEND VERY EASY YOU COULD MAKE BETTER THAT WHAT THEY SENT ME DAVE

sorry Capt I was not able to attach a photo to this site, give me an e-mail and I can send a picture of the lovers. but I will tell you you will not be impressed. with the quality. Have you made any decitions on what you are going to do with your coilovers?, if you want to sell just the front or the rear also ? and do you have the part # for the filler neck, that is where my over flow attaches, now the overflow that I got from Don is REALLY nice!! and also do you have a part # for the wiper package? and now If you are watching the news ,like I need any more pressure to get this car together . I am a general contractor and I am building this car in my carpentry shop,and I need the space, and I live 15 miles south of Iowa city and cedar rapids. all bridges are flooded and about 1 in 15 people are now homeless ,I will be working for about a week just helping out people then . I will be busting my backside to get them back in before winter, so any one that can help me can help,will free me up to help them Thanks from Iowa Dave

CoptEd, Fiinish line louvers will NOT work, sorry. The Austrailans look nice an even look like they may work. I can always modify the vent holes if you want to try them?
http://www.snakebite.com.au/bmz_cach...ge.480x296.jpg

Kawika the rear pro shocks are Pros, part # 11/250, meanng they are ll"s tall with a 250 lb rating-just what is needed for the rears.
DV

PS CPTED- no parts yet, especially rear control arms- may not need to make another trip until I can get some parts so I can get this on its whels?