|
Trying to fix what appears to be a large problem
Take this for what it is meant to be, not in any way trying to get greedy or take advantage of anyone. I have researched a full complete professional roll bar tubing bender machine and dies. The cost is going to be just under $2000.00. Since the guy that bought my shop also stole my tubing bender I haven't been able to help people out with their roll bars.
If any number of people want to kick in the cost for the bender, the hydraulics, and the dies, (Total of 2 grand) I will make them the necessary roll bar for just the extra cost of the tubing. This means the two point, three points, or the infamous 4-points. (My favorite). If this seems fair someone volunteer to be the secretary collect the money, and keep a full record of who invests. One or a dozen makes no difference to me. I can get the ODM tubing 2" inch ODM roll bar material. All roll bars will be two inch. Your only additional cost will be the cost of the tubing and shipping to you. Sorry, if I had the money I would simply replace my bender then charge for the bars. This way it seems to me everyone will win. I will get the bender, you will get the bar at a huge discount and when everything breaks even then I will charge for the bars. Thoughts? If this idea works, by the time the moneyy is collected, the bender and parts arrive, I get what ever tubing is necessary and bend them up, I'm guessing a month before the first bar goes home. If this is a bad idea to you guys then forget I even came up with it! DV |
I'm in.... I want a 4 point bar!!!!
|
DV I am interested ,money is tight with the way crII left me to finish my car, if you get more interest I am in. Dave
|
Dave the way I see it right now we need four more people, five or six would be better, but we'll wait and see.
DV |
sounds good thanks
|
DV
any chance you would send me a couple pictures?? [2 point, 3 point, 4 point roll bar]. Also, what do you consider an appropriate amount $$$$$. THANKS Tony cobrabuilder@gmail.com |
DV,
PM me the bender info ;) |
Chestnut,
Here's a two point- not legal for NHRA anymore and will not make them,http://www.clubcobra.com/photopost/d...0119pic055.jpg A Five poinit with padding- Leagal in all racing sanctions from SCCA, IHRA NHRA, and SCCA. The center bar is neither in the way of the driver OR the passanger and is totall removable leaving it just a four point. http://www.clubcobra.com/photopost/d...0119pic008.jpg Standard 3-point-The Mrs. was fitting a protoype rear spolier for the 150 mph range, http://www.clubcobra.com/photopost/d...10119Wing2.jpg |
| All times are GMT -7. The time now is 11:03 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: