|
New Paint Job
2 Attachment(s)
Thought I would share. Roll bar, side pipes and inner portion of Halibrands will be powder coated black. What do you think?
|
Looks sweet, Curt!!! Nice job
I did the same thing with my AR wheels http://www.clubcobra.com/photopost/d...R_Wheels_1.jpg |
Curt,
Always good to share! (Watch the inner ring that goes on the spindle or the rear hub.) If they powder coated the inside of the hub it's going to ve tight, if not too tight! Just another 2C's. DV |
New paint
Curt
Very nice color scheme, who did the work and how much did it set you back? Ed |
Curt,
Just realized your paint puictures could be brought up a size ot two. Congatulations to your or your painter, that color is one big piece of nightmare to do and he/she did it with excellene! Now seeing one hole on the passanger side for the roll bar only makes me wonder if it is set for a left and right three-pointer or for an infamous four-pointer? Once again-be proud! DV |
Ed,
This was an insurance job. I got into a minor fender bender. Zero frame / mechanical but the hit sent ripples through the fiber glass in the rear. We could not locate a rear clip so I purchased a whole new body from CR in Canada. Tom's Motorsports is handling the body RR and a guy that does contract work for him did the paint. I will get the exact name of the painter and advise if you would like. Cost - around $8,500. DV, yes the paint work is great. In fact it is flawless. When it is all done with the accessories back in place I will post another pic. DV, my roll bar is a custom 4 point. See my gallery. |
Hey Curt,
Maybe you can do me a big favor while you still have the trim off your car? Can you supply me with the measurements for the front and rear tubes that the bumpers mount to? DV says the rears and fronts are different lengths and I need to find someone to machine me a set out of aluminum. %/ Any help/info you can get me is greatly appreciated!!! :D |
capteddie,
According to the manual, you need (4) 8" spacers for the front and (4) 6 3/4" spacers for the rear. All of the spacers are 1 1/4" od with a clearance hole for a 1/2" bolt. Terry |
Quote:
Great!!! Thanks Terry!!! |
| All times are GMT -7. The time now is 07:50 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: