|
what is this and where does it go?
The label(s) say
10600 ea panel, latch access c427 left (and right) It is a big plastic piece with two labels |
d20180,
Need a picture. Terry |
1 Attachment(s)
|
1 Attachment(s)
|
just guessing --is that seatbelt latch >?
|
You have to cut it into two pieces. It covers your door latches inside the rear fenders wells. Look at the inner wheel well you will see a lage cut out on each one. once you get the wheel well piece installed with the metal support bar from the latch to the frame is bolted in place you will see how they fit.
DV Firts time I have seen this piece as a molded piece! |
Thanks, that makes sense.
|
| All times are GMT -7. The time now is 04:13 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: