|
Sheet Aluminum
A friend and I are considering restoration of a 3000 series Cobra.
We'll need someone who can save some severely damaged panels, and beyond that, make some new replacement panels. Who would be the go-to guy for that, if you want the very-VERY best? Frank |
Quote:
Seeing where you and your "friend" are located McClusky would be the man to see. Bill S. |
Quote:
http://www.mccluskeyltd.com/ Bill S. |
alum panel work
Hello, We used Panel Craft in NH for repairs on CSX2498, Joe is one of the best. He made a new hood for my alum 427 Cobra too, a perfect panel.
good luck, karl www.panel-craft.com |
McCluskey = original cobras.
|
Panel Craft also works on = Originals. :cool:
Here is a repair of 4000 series car. http://www.panel-craft.com/sc_cobra.php He has done both 2000 series comp cars, street cars and an original S/C that I know of. My vote is Joe if you are on the East (right) Coast. Pick the location that allows you to see the car in progress. West Coast McCluskey would do.... Joe is great to work with and his Customer Service A-1 |
I have worked with Joe at Panelcraft he is one of the best for sure. I would as suggested stick with someone you can visit and discuss the project with. Geoff Howard in CT, Mike McCluskey in CA, Drew Serb in CA, Alan Baresh in WI. It gets to be a pretty short list of the top notch guys. I just know a few of them and make flatter stuff for them :-)
|
So Frank, are you going to show us a current picture of the chassis you plan to restore, or are you building an air car around a door hinge that Bob Sbarbaro had left over from CSX 3303 after he sold it to Gordon Gimbel way back when?
Bill S. |
Now, Bill, let's not be confrontational. Just because "FIACOBRA" knows no better over on that other site doesn't mean intelligent people should follow suite. You no doubt will recall that Frank'sAlterEgo made it clear that Bob never owned 3303, so it is obviously another car for which they need sheet metal. Let's just call it "not 3303" for now, OK?.
|
| All times are GMT -7. The time now is 04:03 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: