Club Cobra - body............Shelby Cobra Daytona Coupe

Club Cobra (http://www.clubcobra.com/forums/)

- Cobra Build Logs (http://www.clubcobra.com/forums/cobra-build-logs/)

- - body............Shelby Cobra Daytona Coupe (http://www.clubcobra.com/forums/cobra-build-logs/136478-body-shelby-cobra-daytona-coupe.html)

Hi,
well documented construction.
Intrested to see the rear and the rest.

you guys are unbelievably talented, thanks for sharing these projects.

Quote:

Originally Posted by Tony Ripepi (Post 1414070)

Hello Almaznc,

B\Great Work...

One of the guys here on the West Coast made the same journey but, chose to follow a traditional path in Aluminum.

Take a look at his details, I had a very minor part in the process.

Home

Tony R.

Many hours of good reading here 👍🏻

Hi Almaznic,
Things are moving along very nice! Why so many small sections for the front of the nose, instead of casting it as one or two pieces? Future modifications? Looking forward to the next update.

Mike.

Quote:

Originally Posted by krausewich (Post 1432790)

Needed for the part to release from the mold. Pulling the nose from a one piece mold will not work with the sides curving inwards and the radiator outlet.

Quote:

Originally Posted by krausewich (Post 1432790)

Добрый день.
1. Количество матриц в передней части кобры это возможность легко разобрать всю матрицу. С наименьшими усилиями и общими повреждениями детали и матрицы.
2. Как Вы заметили на нашей детали капота нет выемки для передней оптики. Кроме того я не знаю какие фары буду использовать для установки. Поэтому переделки матрицы будут.

Hello!
1. Many models (matrix) in front of Cobra is a way to easy de-construct all the matrix with less power and less damage to matrix.
2. As you can see, there is no dot for front lights. Besides, i don't know exactly what kind of lights i will use in future; that's why remakes of matrix will be.

Almaznic, which frame will be used for the body?

Quote:

Originally Posted by monster7 (Post 1432995)

Almaznic, which frame will be used for the body?

I have many ideas for car's landing gear.

I sure i can copy the details from FFCars judging to pictures.

but it's too early to speak about it.

У меня есть немного идей по шасси автомобиля.
Так же судя по количеству фотографий шасси от FFCars их не сложно скопировать.
Но пока об этом рано говорить.

https://img-fotki.yandex.ru/get/4784..._368652b_L.jpg

https://img-fotki.yandex.ru/get/5097...b1a280de_L.jpg

https://img-fotki.yandex.ru/get/7628...cd52b3a7_L.jpg

Nice work! Thank you for sharing and keep the pictures coming.

Wow, a lot of work and really a great job. Thanks for posting the pictures and keep them coming so we can follow along with your build. What motor are you going to use?

Ron

Loving this thread! I'm waiting for the Yak DNA to show up. Is it going to get machineguns at some point?

Любить эту нить! Я жду, когда ДНК Яков покажет. Это собирается получить пулеметы в какой-то момент?

Quote:

Originally Posted by Ron61 (Post 1436072)

Wow, a lot of work and really a great job. Thanks for posting the pictures and keep them coming so we can follow along with your build. What motor are you going to use?

Ron

As you see there are a lot of work in front so i hav't think about engine yet.

Besides, soon i'll finish 2 more projects for construction.

I can try on these projects, that's why i'll be ready to Cobra with full knowledge.

Market of contract's engines from Europe and Japan is rather developed in our country.

I think Japan's engine 2JZ-GTE , 2JZ-GE will be optimal here - it's very useful and not expensive.

Quote:

Originally Posted by lovehamr (Post 1436073)

Machineguns will be later, firstly we need body:D