|
2 Attachment(s)
Thanks
Next up is fitting the radiator, I made up a new top plate for the rad to look more like the originals. Once it's painted black it should look nice. |
3 Attachment(s)
Front inner panels made up and installed.
Oil cooler added along with the side vents and badges. |
2 Attachment(s)
Steering rack in place and started on installing the brake lines.
|
Nice work....as always :)
|
keep the photos coming
|
2 Attachment(s)
Pedal box complete and installed, all the brake and clutch hard lines installed.
|
look how low the holes are for the heat shield over the brakes, mine on my CSX are an inch higher and the heat shield hits the pipes... This confirms the person who installed mine was drunk... add to the list of assembly issues with the CSX
|
1 Attachment(s)
Next up, fitting wiring components to the firewall etc.
Voltage regulator on passenger foot box, (think I will paint that blue cover black) fresh air valve to the foot box installed, wiper motor mounted. Time to make up and fit the dash then roll out some wire!:cool: |
reg?
are you actually going to use the voltage reg or is it for show?
|
is that a Kirkham car?
|
Quote:
|
2 Attachment(s)
Making up the steering column, needed to machine up a few steering wheel hub nuts.
|
2 Attachment(s)
Next up I installed the diff, apart from the weight of the thing all went well.
|
Craig,
Looks nice. Yes, they are heavy. I recall struggling with mine during the install, a lot of weight and a tight space to fit it in. Jim |
Kiwi
Are you aware of the bad bump steer on your steering.....?? |
Quote:
Seriously but, if you have any setup suggestions, settings or measurements etc I am all ears. Thanks for any help. Cheers. |
3 Attachment(s)
Little more done today, radiator and fans installed.
Started in on the wiring. |
Good progress!
How long do you anticipate the wiring taking? I haven't done one before.... %/ Cheers, Glen |
Quote:
It takes a few day's if everything is ready to go, a little longer at my pace.:LOL: |
2 Attachment(s)
Waiting on a few items for the wire harness, time to start in on the control arms.
|
| All times are GMT -7. The time now is 05:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: