- -
spf598
(
http://www.clubcobra.com/forums/cobra-build-logs/148045-spf598.html)
| dogarms |
01-05-2025 12:32 PM |
spf598
Hello All! I am replacing the fe 390 in my spa 598 cobra with an all aluminum 482. Want to use my vintage MEDIUM RISER 2x4 intake with the factory Holley carbs and the cobra branded oval air cleaner. tried to do a '' mock up'' using a level and blocks of wood to estimate the height of this taller intake to determine of the air cleaner would clear the hood when closed. trying to avoid pulling the intake from the 390 and setting the 2x4 on to see if it will clear. Amy one have any ideas or experience with this? Ant6 help would be greatly appreciated
|
| All times are GMT -7. The time now is 11:21 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
