|
Cobra w/ new side-oiler/ stroker
1 Attachment(s)
Selling my toy. This is a jaw-dropping machine. Newly restored. As of 7/22, engine is 2 weeks from completion of entire rebuild. Less than 1000 miles on new, transmission, rear end, interior and paint.
Chassis: Not a kit but 1 of only 50 superb factory built chassis by Glaspac corp. in 1983. 3/8" hand laid/chopper reinforced fiberglass, 9" rear end with new factory 3:70 gears (also have set of 4:10 in box ),new posi carrier and axles. 5200 original miles. Tilton dual master cylinder. 11" front disc brakes. Mustang II front suspension, 3 link coil spring rear suspension. 17" Compomotive wheels with Nitto extreme 275/45/17 drag radials in rear and 255/45/17 extreme in front. Paint : Paint by Jerry Farley using full PPG urethane system. Hand wet sanded and buffed Indigo Blue Metallic with White Pearl stripes Engine: 500+hp 66 427 side-oiler (X block with thicker cylinder walls and deck) with a 428 crank. Dyno'd 400hp/409 torque @ rear wheels, Ported and polished Dove heads with Dove roller rockers, forged Ross 10:5 flat top pistons, FPP high volume oil pump, custom built Moroso 9qt oil pan with trap doors and windage tray, .650" lift Lunati solid roller cam 248/256 duration, Comp Cams roller lifters, Custom built mandrel bent 2" chromed headers into chromed side pipes, polished/powder coated and ported Offenhauser Port-O-Sonic intake, Da Vinci 930 cfm carburetor, MSD Pro Billet distributor, MSD 6-AL w/Blaster-2 coil, MSD 8.8mm plug wires, Mallory fuel pump, Fram fuel filter, -6 braided stainless fuel line, Chromed 1-wire GM alternator, FPP billet pulleys, 1/0 gauge streetwires power distribution system. Optima battery, Dove high volume water pump, Be-Cool aluminum radiator, Dual 11" Spal shrouded fan assy, oil filter relocation kit with B&M engine oil cooler, stainless radiator hoses. Externally balanced Hays aluminum flywheel. Transmission : New World Class T-5, Lakewood bell housing, Tilton hydraulic throwout bearing, Centerforce Dual Friction clutch. Interior : All new interior by EZ Seats. Italian leather seat covers, matching vinyl trim, Keyston bros. carpet, custom Mahogany dash trim, Driver and Passenger Simpson harnesses, Chevy tilt steering column, deep floor pan, custom fiberglass trunk panels and painted tank with chrome straps. Electrical : Stewart Warner and VDO gauges, all new Lucas lights. Extras : unfinished Hard top, chromed sliding window frames Over 70k and 2.5yrs invested. Priced to move asking 39,900.00 Trades considered Bret Bradbury Hm 972-222-7466 Wk 214-368-4422 (working nights 10p-6a) e-mail bretb@hawkpci.net Please view pics @ at www.bradbury.org/bret/cobra (the top 6 are 1 year after the bottom ones) |
| All times are GMT -7. The time now is 08:35 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: