Another Atlanta FIA For Sale
 

It's time for another project so my Unique FIA is For Sale


Well sorted (2,600 miles) Unique FIA (ID#2899420, manufactured in 2003) powered by a SA 396 stroker running through a wide ratio toploader to a 3:31 limited slip Jaguar differential. Team III 16” wheels (8” fronts, 10” rears), B.F. Goodrich T/A’s (245/50/16 fronts, 265/50/16 rears). PPG Mercedes Brilliant Silver. The car is registered in Georgia as a 1964 Cobra FIA. Build pictures and receipts are available. See my Gallery for pictures.

$41,000

Unique Deluxe Pallet with following Options
Tonneau Cover
Aluminum Foot Box Heat Shields with Thermite Insulation
Battery Disconnect
Driveshaft Safety Loop
Moroso Remote Oil Filter
Hurst Indy Shifter (relocates shifter to proper FIA position)
5 Point Harness (both sides)
Heater (no defroster cuts – have the aluminum vent covers)
3 Raydyot Mirrors
Seat Track (driver’s side)
Instrument Upgrade (Stewart – Warner large face)
Wind Wings / Sun Visors
15” Leather Steering Wheel
Moroso Inline Filler
Differential Cross Brace
Oil Cooler w/ Stainless Hoses
Canton Expansion Tank

Added
Optima Battery
16” Puller Fan (twin pushers included but not mounted)
Aluminum Shrouding for Oil Cooler / Radiator
MSD Ignition
Indoor Car Cover

Engine Build Sheet
351 W Block – E3AE-6015-18
Scat #8160 3.850” Steel Stroker w One Piece Seal
Ford D60E Forged Rods w ARP Bolts
Engine Tech – Hypereutectic Pistons 9.8:1 Compression
Hastings Molly Rings
Engine Tech Bearings
Elgin E961P Solid Lifter Cam (cam card available)
Melling High Volume Oil Pump
Canton 8 Qt. 15-660 Pan
Edelbrock Performer RPM Aluminum Fully Ported and Polished Heads
Edelbrock Performer RPM Port Matched Manifold
Motorsports Roller Rockers
Motorsports 8.5” Heat Treated Pushrods
Holly 3310 750 CFM with Choke Removed and Quick Change Spring Kit (assorted springs and jets included)
Centrifugal Advance Electronic Distributor (looks like original style)
Carter High Volume Mechanical Fuel Pump
Aluminum High VolumeWater Pump
March Pulleys
Aluminum Flywheel
Ram 11” Power Grip Street Strip Clutch (new less than 200 miles)
Lakewood Blow Proof Bellhousing

Randy

... and another one bites the dust! :(
So did you figure out what's next yet??? :D

Anyone looking for an FIA needs to come to Atlanta, we have some beautiful ones for sale here.

"So did you figure out what's next yet??? "

I have a few things in mind - it depends on how I sell my FIA - turnkey vs roller. You saw a few options last Saturday :p

Randy

Sounds fun! I alread put a call in about reserving a Hawk. :D

Hey Randy - If the car sells as a roller, bring the motor over and we can run it on the stand.:rolleyes:

I for one get my Cobra thrills these days playing tag-along with Randy (I'd also try TC but most of us have never actually seen his car on-the-road) - his car will scoot, very impressive for a small block!:p

Randy is quite the fabricator of bits and pieces (some large) and that kind of handmade detail is hard to come by - it's a good car!:)

Thanks Cracker! I'll tell you all about my next project when I see you.

Randy

After a spirited drive through the countryside I have come to my senses, or lack thereof, and decided to keep my car.

To those of you that inquired thank you for your interest, also thanks for being slow to pull the trigger, you saved me from myself.

Randy

Randy - Glad to hear it!!! :D

:D WOOHOO!:D