10-23-2003, 05:57 PM
|
 |
CC Member
|
|
|
Join Date: Jan 2001
Location: Brighton, Michigan USA,
Posts: 213
|
|
Not Ranked
Aluminum Fuel Tank
See my gallery for a picture of the aluminum tank that I had fabricated. As BiB suggested, I've designed an angled top to facilitate access to tighten hose clamps. It has a bottom sump, a fuel drain port and a rollover valve. The LeMans cap I bought from Enzo at Finishline. It looks much better than the boat cap that comes with the kit and has a sealed, locking cap inside, so no fuel sloshing out into the cap. Larger capacity too.
Gary, to reduce the size of your image files, do you have any photoediting software, such as Photoshop or ACDSee? I use the editing features to crop the image to minimum size, then save as a compressed JPEG image. This easily gets my image files under the 300K limit. If you don't have any photoediting software, open your image in MS Paint (in the Accessories file in Programs) and save as a JPEG. I just tried this and it reduced an 800K file to less than 200K. Hope you can make it work!
Chuck
|
Threaded Mode
