| Michael4yah |
03-25-2011 04:40 PM |
Help with Contemporary Cobra
Does anyone have photos of cowl hoop and where it attaches to frame? Photos of frame where the roll bars are attached? Also what is the normal clearance between rear inboard disc and lower control arm? Mine is very close.
Thanks Michael
|
| redmt |
03-25-2011 04:59 PM |
I can email you the manual if you want
|
| Mike_I |
03-25-2011 07:07 PM |
|
| 767Jockey |
03-25-2011 08:14 PM |
Michael,
Hopefully there is something in my gallery that can help you. Keep in mind, however, my car was originally built with no roll bar. The roll bar mounts you see in the pictures were custom built by Nick Acton. They're not Contemporary factory roll bar mounts.
Doug
|
| Michael4yah |
03-25-2011 08:53 PM |
Thanks Mike and Doug. I appreciate it.
|
| mickmate |
03-26-2011 06:52 AM |
Michael the cowl hoop is glassed into the cowl and has bolt flanges on the floor in the footboxes to attach it to the frame. I'll see if I can find a pic for you.
|
| ccx1984 |
03-26-2011 08:11 AM |
cowl hoop
the hoop was fitted and welded in place, if you look close most welds are only where you can see , look on the back sides and there are no welds. i removed mine by cutting the three 5/8" tubes that hold the dash hoop and rotating it out then flanged them to make them bolted. tigged welded all brackets cleaned and radius all corners, blasted and painted and reinstalled.
|
| Michael4yah |
03-27-2011 11:57 AM |
Thanks to all, If anyone had some close up photos of where the roll bar meets the frame Id appreciate it. Also if someone could point me to the "how to post pics in these threads" info Id appreciate it.
Michael
|
| All times are GMT -7. The time now is 06:18 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
