Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Contemporary Classic Forums (http://www.clubcobra.com/forums/contemporary-classic-forums/)
-   -   Upgrading Contemporary Cobra Suspension (http://www.clubcobra.com/forums/contemporary-classic-forums/116549-upgrading-contemporary-cobra-suspension.html)

LeonardU 07-25-2012 08:27 PM

Upgrading Contemporary Cobra Suspension
 
I have an early Contemporary, #3050, with torsion bar front suspension, original Koni shocks in the front, upgraded anti-sway bar in front and Aldan single adjustable shocks with Eibach springs in the back. The ride is too soft. I have been told that I need to get double adjustable shocks for the rear. Is this necessary and advisable? If so, what do you recommend that is reasonably priced? If not, what do you recommend? I want a good modern shock for the front. Any suggestions? I do not have Watts Link in the rear. What is the advantage of Watts Link? I do not race or do burn outs. I just want a good handling street car. Mickmate, do you still make your Watts Link? Can radius rods accomplish the same thing as Watts Link? If Mickmate doesn't still make the Watts Link, anybody else fabricating one? Thanks for any help you can provide.

Len

Three Peaks 07-25-2012 10:10 PM

A quality single adjustable shock like the QA1's and the proper spring rated springs would go a long way to giving you the ride you are looking for. Double adjustable shocks are great if you are running track days a bit but not really necessary for a quality and/or sporty ride on the street.

Check your springs to see what they are rated and either ask here or go to one of the sites that has a spring calculator for your application. I believe QA1 has a calculator on their site for sizing springs.

Bob

mickmate 07-26-2012 06:23 AM

The ride is too soft at the rear? That would just be a matter of getting the correct spring rate. I believe you want around 300-325 springs. Any idea what you have?
I am still making the retrofit watts linkage kit. If you have nothing to stop the forward/back movement that gives the rear end a workout. They had (mushy) rubber bushed radius rods in the Jag. We are typically running much higher horsepower and fatter tires on the rear end. The greatest advantage to the watts is positively locating the rear hub carriers with no front/rear movement and it does more than the suspension travel with no bind and no arcs to pound the swing arm bearing.


All times are GMT -7. The time now is 07:27 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: