| burdman |
05-05-2013 02:40 PM |
contemporary rear bolt-on hubs/1985
5 Attachment(s)
I have finally made it back on line. Thanks to all who have responded. I hope these pics will help. The outer brg has spun on the shaft.
|
| strictlypersonl |
05-05-2013 03:07 PM |
XJ bolt-on hubs are identical, bearing-wise. What is the stud hole pattern and the distance from the hub face to the small-bearing end?
|
| mickmate |
05-06-2013 06:19 AM |
Those look like the CCX conversion from E type wire wheel hubs to a bolt on. As Bob says they should be the same. If you get some dimensions or want to put another hub alongside them let us know.
|
| burdman |
05-06-2013 05:26 PM |
mickmate, you have shaken some cobwebs from this old brain. I do recall Peter saying that my original hubs were wire wheels. The bolt pattern is 4.5 in. The dimensions are hard to read in the photos. The dimension from the flange face to the brg is approx 2.25in. burdman
|
| burdman |
05-06-2013 05:29 PM |
stricklypersonl, thanks for the info. xj hubs should be easier to find.
|
| mickmate |
05-07-2013 05:46 AM |
|
| strictlypersonl |
05-07-2013 06:21 AM |
It looks like your current hub offset is substantially different from the XJ. That means, without the addition of spacers, your wheels will move in. I've attached a drawing of the stock XJ hubs.
Hub Drawing |
| racco |
06-03-2013 12:29 AM |
Ccx hubs
I have two of those hubs in perfect condition from my ccx pm me .
Rocco
|
| All times are GMT -7. The time now is 09:45 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
