|
Cobra Restorers Trunk Stay
Hi Doug, I have posted two pictures of the Cobra Restorers Trunk stay in my gallery photos. It comes with the two brackets you see riveted in place. I slotted the body hoop mount to put the holes in the center of the round hoop and filed a flat on it so it would not rock. The other end has a contour that is reverse of what is needed to follow the trunk lid frame contour. Rather than try to get the reverse contour, I opted to flatten it out and use Well Nuts to take up any misalignment to the fiberglass frame. They hold good in fiberglass and give it some cushion. The way Contemporary did it is described in the manual and would involve drilling the rivets, fabricating a bracket, and bolting thru the frame parallel to the surface. Jeff's picture shows this detail.
|
| All times are GMT -7. The time now is 06:20 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: