|
Gas guage
My contemporary gas gauge has decided to stopped working. The car has a fuel cell from Triangle engineering in Florida. Any ideas where I should begin?
Stu |
Check your wiring first.........
If that checks OK: Typically they are 0-90 ohm range gauges. Fuel-Safe/Autometer 2 1/16th " cut-out. $70 at www.PegasusAutoRacing.com . PN# 2524-gauge. If it is the sender, PN# 2524-12inch 2524-24inch. $160 - $185. |
Go directly to the source...
Centroid Products But first I would make sure that your gage requires 90-0 range rather than 33-270 ohms by grounding out the signal wire from your gage. If it pins the gage at empty, it's the first range. |
Had a Centroid in my CCX, never could get the thing to read right, installed a FS......much better IMHO.
|
| All times are GMT -7. The time now is 01:50 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: