|
New to the Coupe Forum
Hello all. I'm hoping some of you Superformance owners could be so kind to share some pics of your Daytona Coupe engine bracket set ups. I'm currently having a coupe built and would like to replicate similar bracketry (just AC and alternator). As you probably know there's not a lot of brackets out there that put the alternator on the driver side. Pics of the crank pulley would help as well if you have any.
I doubt its too dificult to fab up some of these brackets, but some pics would be helpful. I actually have a good one already for the AC bracket (Coupedup's album). I need the AC and the alt up high (~even with the heads) to go with the dry sump :) Any help would be appreciated. Once my build gets a little farther, I promise to start a build thread. Mat |
Look in Tony Ripepi's gallery for some pix
|
Come on, just one pic. I'll throwing a ride at run n gun in October.
Mat |
Daytona Coupe Engine Accessory Brackets
Here is a photo of my Roush Engine before installing it into a SPF Daytona Coupe.
http://www.clubcobra.com/photopost/d...essoryView.jpg |
Thanks, that helps more. More to the brackets than I thought. Looks like I'll get to practice using my plasma cutter quite a bit to rough these pieces out.
More pics at more angles from others would still be appreciated. Mat |
Spf engine brackets
I'm having trouble uploading my engine photos but I did my own install and have photos of my mounts and installation that I will send you in an email if reply with your e-mail address. Apparently all I can upload are photos that I've already uploaded. Ron Weingart
http://www.clubcobra.com/photopost/d...546HDL7812.JPG |
| All times are GMT -7. The time now is 02:42 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: