|
anyone know this coupe?
4 Attachment(s)
looking to see if anyone recognize this coupe? i been working on it for months and bought it out of NJ in NOV. like to find the previous owner that actually knows about the car than the jack ass i got it from.
thanks in advance. |
Look's somewhat familiar, 2years ago, on CL (Portland Ore." there was a FFR Coupe (White with blue stripe, single pipe on each side) for sale there, the ad said needs tune-up, and minor work, The guy I spoke finally admitted, he knew nothing about the car, it was "Friend of a Friend." The car had no title but had a Ore. Plate on it?? The tune-up was just nothing, as he said. I received his video "Nothing more than a Rod knock I found out"!!! Talked to the person that Quote, unquote own it, MORE BS. At the same time frame, I found it online at an Auction in Indiana!!! He said that was mistake??? What?? PM me, if you think this the same car and I'll tell more, Cheers Tom.
|
Looks familiar as Tom has pointed out....Being, at one time, heavily involved in the NJ kit car scene, can't say I'd ever seen it. Was it northern, or southern, NJ? Not a FFR, not a Contemporary, although the body might be that from Lesher or Contemporary. Lesher was using 4" mandrel bent round tube for their frames if that helps narrow things down. Last I heard, Lesher had switched to 99% Spec Miata work and had essentially abandoned the Daytona Coupe for lack of interest. Uncertain what became of the old Upstate Replica (ex-Contemporary) jigs and molds after their ownership back in the 2007 time frame.
Bill S. |
Might be one of Lee Benson's, he has since passed, I believe, his shop was in Pa, near Harrisburg?
|
all good responses guys!
Feel free to Message me if you want to send me more " possible " info. All i know is it has a ton of pretty neat stuff on it, and some not to " street " friendly stuff. rear end is a winters quick change, wilwood superlite brakes, full floater rear axles, 3 link, with a J bar, pretty different stuff.... like it was a racecar at some point. Front suspention is very limited travel, and big brakes, willwood superlites, 11 3/4 disks that are 1 1/4" wide, with a 8 on 7" bolt circle... like late model brakes back in the day. overall, im getting it put together and hope ill be able to finish it up and drive it, just wish i know 100% who/ what shop built it. would make it much easier to deal with. |
Tom,
if you still have the video, could you send it possibly? |
I started building one similar many years ago.Too much other stuff going on to finish, unless some sugar daddy wants to fund finishing it, It'll stay in storage-http://www.clubcobra.com/photopost/showphoto.php/photo/13451/ppuser/9746
|
Sorry, I deleted it right after trying to deal with these two clowns. I do remember, it had a 351W, unknown if bored or stroked, some kind of Alum heads, and a set of 48 or 44IDA Weber's. And of course, the rod knock that went with it ;) Did not ever see it in person, they called it a "Special FFR" When I asked what Gen. it was, it was like deer in headlights, HUH?
|
Does it have CT assigned vin? Looks like Mark Reid’s car. His was a gen 1 coupe #190.
|
Quote:
Bill S. |
no it had a GA registration that is all i got with it. my state of AL doesnt require a title as its so old on old registration that it wont have a title.
|
Quote:
pretty badass! |
5 Attachment(s)
few more photo's.... someone must have seen this thing being built or photos of it at some point...
|
looks amazing, but i have no idea.
|
3 Attachment(s)
few updates.
motor in and few other little projects, radiator mostly installed with AN lines, correct pin drive adaptors for FIA wheels thanks to Vintage! lots of Tin work, and extra care given to try to keep the heat out of the cabin by protecting the foot wells with DEI thermal aluminum backed heat shield from Summit. little bit of wiring and test fitting stuff like, the remote oil filter and coil. enjoy trying to upload photos... what a pita |
2 Attachment(s)
hope they show up....
|
3 Attachment(s)
few more
|
You could also try searching online marketplaces or classified ad websites for similar cars in the NJ area to see if you can find any potential leads. Good luck with your search geometry dash unblocked
|
| All times are GMT -7. The time now is 04:39 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: